EC1500-380A motor drive controller

Product Category:
Industrial inverter controller - Industrial fan drive controller

I. Technical parameters
1. Rated working voltage range: 380Vac±20% 50~60HZ.
2. Rated input power: 2kW.
3. Rated operating environment temperature: -25℃~60℃.
4. Power factor > 85% (equipped with reactor).
5. Protection mode: PCB surface coated with UV glue.
6. Driving board design pollution level: III.

Ii. Function introduction
1. Power over-voltage protection, motor phase line over-current protection, power parts over-temperature protection, power phase protection, motor phase protection and other fault protection functions.
2.485 Communication control function: Baud rate 9600 can be customized according to customer communication protocol.
3.VSP speed control function: 0~10V.
4.PWM speed control function: 10~20V 1KHZ 10~90%.
5.FG speed feedback output function.
6. The control side can store multiple sets of motor parameters, using dip selection.

Iii. Product characteristics
1. Use FOC control scheme, with low noise, low vibration and other advantages.
2. Constant speed, constant power, constant torque, constant air volume and other working modes can be selected.
3. External installation structure, with heat sink, can be directly installed on the sheet metal unit.
4. The materials meet the requirements of UL, CCC and CE certificate.

Iv. Typical Application:
This product is mainly used in commercial axial flow fan motor, the forward type centrifugal fan, after to type centrifugal fan, dc pumps, induction motor drive.